Saint Stephen -> | 1969-08-30 | Grateful Dead

54:06

SBD

Transferrer:

Kevin Tobin

SHNID:

gd1969-08-30.122268.dts.tobin.flac16

Source:

<b>DTS-Audio-CD 5.1 Mix</b>; SBD (shn id 8594) Master Soundboard Reel > Cass > DAT > CD; via Seth Kaplan; Seeded to etree by Steve Barbella + AUD1 (shn id 122231) AUD > 4th Gen Cassette, kindly provided by Seaweed1010.

Lineage:

Maxell XLIIS > Nakamichi DR-2 > Edirol FA-66 > Wavelab > R8Brain > CD-Wave > TLH > FLAC 1644 - - dts mixing by Kevin Tobin

Taper Notes:

View Notes---------------------------------------------------------
- Mixed by kevtobin@yahoo.com
- FLAC conversion 08-OCT-2012 - Trader Little Helper
- Tagged 08-OCT-2012 - Tag&Rename
---------------------------------------------------------
Audio Patching;
1) The first 13 minutes and 09.988 seconds were missing from the Audience and was filled in with audio from the soundboard. This included the first 13 minutes of Dark Star.

2) 15 minutes into Dark Star, 1 minute and 17.281 was missing from the Audience and was filled in with audio from the soundboard.

3) 21 minutes into Dark Star, 41.837 was missing from the Audience and was filled in with audio from the soundboard.
 
4) At the end of Saint Stephen, 1.048 was missing from the Audience and was filled in with audio from the soundboard.

5) 1 minutes into The Eleven, 07.045 was missing from the Audience and was filled in with audio from the soundboard.

6) 5 minutes into Drums, 25.543 was missing from the Soundboard and was filled in with audio from the audience.

7) 3 minutes into High Time, 3 minutes and 05.483 was missing from the Audience and was filled in with audio from the soundboard. 

8) I used the soundboard as the timing reference as the audience lineage was "4th generation".
-----------------------------------------------------------
Front
Left Channel SBD  -0db
Right Channel SBD -0db

Center
Mixed to mono -1db Matrix

Surround
Left Channel -2db AUD
Right Channel -2db AUD

Sub/LFE
Mixed to mono -1db Matrix
--------------------------------------------------------------
More On DTS

Today's audio standards are moving towards multi-channel
sound, like DTS and Dolby Digital. While the Audio-CD
standard (Red Book) hasn't changed to accommodate these
new sound formats, it is still possible to go around the
specification and to put a 5.1 surround recording on a
regular Audio-CD. To play a DTS-Audio-CD you must connect
your DVD/CD player via a digital cable (optical or coaxial)
to your DTS Dolby-Digital receiver. It is not 100% sure
that your receiver will recognize a DTS-Audio CD, so the
first time you're trying to playback a DTS-Audio-CD you
must do a test to determine if it can. Begin with the
volume very low, start the disc and raise the volume
gradually. NEVER listen to a DTS-Audio-CD through the
analog audio outputs of your CD/DVD player.

Burning Instructions

Burn them the absolute same way as you would burn any
normal Audio-CD from FLAC files.

Brokedown House Production